F1 System Two-or multi-part access panel with fixed hinges and plasterboard inlay for plasterboard walls

The access panel consists of aluminium profiles, without or with plasterboard inlay 12.5 mm, 15 mm or 25 mm and snap locks. The frames of the access panel each consist of four individual frame parts that are firmly connected to each other by a special welding process. The access panel is equipped with a latch. To avoid possible accidents, this must be rehung after each opening of the door leaf. There is an air gap of 1.5 mm between the frame and the door leaf. The concealed snap locks open the access panel when pressed. This system has been specially developed for oversizes in plasterboard walls. The door leaf is in two parts. Despite the division of the door leaf, there is no fixed centre bar, so that the full clear passage is maintained!

The door leaves cannot be unhinged!

Possible applications:
Non-load-bearing plasterboard walls indoors

Dimensions:
These are made-to-measure products that are manufactured exactly according to the customer's specifications.